Uniden BW140R, Quick Start Manual

Page: 7 / 21

7
Wi-Fi Operating Considerations
• Ensure the Wi-Fi signal reception is acceptable between the BW140R
and the Wi-Fi router. If necessary, reduce the distance between them
to improve overall system performance.
• As the Wi-Fi environments may vary including home construction type
and wireless interference from other electronic devices, your device
may indicate that the camera is disconnected or may display a black
screen.
• Please note the camera can only connect to 2.4GHz Wi-Fi and does
not support 5GHz Wi-Fi connection.
If you’re getting a weak Wi-Fi signal or you can’t connect to Wi-Fi at all
on your phone at the installation area, we recommend moving your router
closer or install a Wi-Fi extender to improve signal reception or selecting
another installation location.
Powering the Camera
1. Insert one end of the micro USB cable to the micro USB port on the
camera (at the back of the camera).
2. Connect the other end of the USB cable into the USB power adaptor.
3. Connect the USB power adaptor into a 240 volt AC (standard indoor)
power outlet.
4. Switch on the plug and allow the camera to power up. This can take
up to a minute.
5. When the camera starts flashing red, it is ready to be paired with your
Wi-Fi network.
Status Indicator Camera Status
Solid Red Camera is booting up.
Red Flashing Waiting for Wi-Fi configuration.
Blue Flashing Connecting to Wi-Fi
Solid Blue Camera is online