Uniden BW130, Owner'S Manual

Page: 10 / 20

10
Parent Unit
•
The Parent Unit is designed in such a way that it can be
operated only with batteries inserted.
•
The battery must be charged for at least 16 hours
before the unit can be first used independently of the AC
adaptor. You may use the unit during this time.
To switch on the Parent Unit again, press and hold the
Power button. The Power LED of the Parent Unit will light up
green to indicate that the device is active.
If the battery on the Parent Unit is low, the unit will beep
twice. If the device is not connected to a socket, it will switch
off automatically after a short period.
The Power LED will turn off.
Operation
Connect the AC adaptor on the Parent Unit (with batteries
included) to a socket. The device automatically switches on,
and the Power LED will light up green.
If the AC adaptor is unplugged, the unit will switch to battery
operation. The standby time will depend on the battery
charge status.
To switch the unit off press and hold the Power button, and
the Power LED will turn off.
Points to note when installing the Parent Unit: