background image

1

Do not expose this product to liquid (water, 

alcohol, etc.) or submerse in liquid for any reason.

Important Safety Instructions 

This product is NOT waterproof. To reduce the risk 

of fire, electrical shock, or damage to the product, 

DO NOT expose this product to rain or moisture.

When using the headset, always follow basic 

safety precautions to reduce the risk of fire, 

electric shock and injury to persons, including 

the following: 

Do not use this product near water, for 

example, near a bath tub, wash bowl, kitchen 

sink or laundry tub, in a wet basement or 

near a swimming pool.
Use only the power cord and batteries 

indicated in this manual. Do not expose the 

battery (or the device) to flames or dispose 

of it in a fire: the battery may explode. Check 

with local authorities for possible battery 

disposal instructions. 
Do not disassemble, modify, or attempt to 

repair any component of this product. 
Check the laws and regulations on the use of 

mobile phones and hands-free equipment 

in the areas where you drive. Always give 

full attention to driving and pull off the road 

and park before making or answering a call if 

driving conditions require.
Do not allow children to play with the 

headset: it contains small parts that could 

become detached and create a choking 

hazard.
Turn off your headset when pumping gas, 

handling flammable materials, or in any area 

with a risk of explosion. In rare occurrences, 

this product could generate sparks which can 

Summary of Contents for BT359





















Reviews: