Uniden BT112, User Manual, Page: 15 / 22

15
Cleaning the headset
If necessary, remove the ear cushion and earhook. Dampen a lint-free
cloth with water or a cleaner specifically designed for electronics, and
gently wipe the headset clean.
Do not expose this product to liquid (water, alcohol, etc.) or submerse in
liquid for any reason.
Avoiding hearing damage
Using any headset or earbud at too high a volume can cause permanent
hearing damage. To reduce the risk of hearing damage:
Set the volume at the minimum level needed to hear in the current
environment. If possible, use your headset in quiet surroundings or try
to move to an area with less background noise before adjusting the
volume.
Start with the volume at its lowest setting, then gradually increase it
until you can hear. When the headset has reached its maximum level,
you will hear a beep. Press MFB again and the headset will take the
lowest volume level.
Turn the volume down before powering off the headset and readjust
the volume each time you turn it on.
•
•
•
•
•