Uniden BR330T Owner'S Manual Download Page 73

Page: 73 / 156

Programming Radio Systems

Enter a talk group ID

Note: You can enter I-Calls by pressing then the
I-Call number. You can enter the I-Call wild card by
pressing

then

Refer to the appropriate section to change a
channel setting:

• See “Editing the Channel Name” on Page 91
• See “Editing the Talk Group ID (Trunked Channels

Only)” on Page 94

• See “Setting Channel Lockout” on Page 96
• See “Deleting Channels” on Page 97
• See “Copying/Pasting Channels” on Page 97

To program another channel within the same group,
press

, then repeat the above. To create another

channel group and enter more channels, press

three times, then proceed from “Entering/Editing
Motorola Channel Groups” on Page 72.

Programming EDACS Systems

Program System

New System

EDCS

Confirm? Yes=“E”/ No=“.”

Next, rotate the scroll control to select the type of
EDACS system you want to program, then briefly
press the scroll control to select it.

•

WIDE

- Use for wideband EDACS systems

•

NARROW

- Use for narrowband EDACS systems

•

SCAT

- Use for EDACS SCAT (Single Channel

Autonomous Trunking)

Confirm? Yes=“E”/ No=“.”

Menu

Summary of Contents for BR330T





























































































































































Search results

Summary of Contents for BR330T

Reviews:

Brands by name

Popular brands

Uniden BR330T, Owner'S Manual

Search results

Summary of Contents for BR330T

Reviews:

Brands by name

Popular brands