Bluetooth MIC
LED Indication
Powering On
Blue LED blinks 3 times
Power On (Remote PTT/Blueooth headset not connected)
Blue LED blinks 1 time every 5 seconds
Powering Off (via LINK button)
Blue & Red LED blinks for 2 seconds
Power Off (Mobile Radio)
LED turns off
Connected to Remote PTT with Wired Earpiece MIC
Blue LED blinks 2 times every 5 seconds
Connected to Remote PTT without Wired Earpiece MIC
Blue LED blinks 3 times every 5 seconds
Connected to Remote PTT & Bluetooth Headset/Car Kit
Blue LED blinks 4 times every 5 seconds
Pairing
Blue LED and Red LED will blink alternately
Remote PTT
LED Indication
Powering On
Blue LED blinks 3 times
Power On (Remote PTT/Blueooth headset not connected)
Blue LED blinks 1 time every 5 seconds
Connected to Bluetooth MIC with Wired Earpiece MIC
Blue LED blinks 2 times every 5 seconds
Connected to Bluetooth MIC without Wired Earpiece MIC
Blue LED blinks 3 times every 5 seconds
Pairing
Blue LED and Red LED blink alternately
Battery low
Red LED blinks 1 time every 5 seconds
Battery very low
Red LED blinks 2 times every 5 seconds
Charging
Red LED turns on
Tone Indication
Tone heard through Headset
Power On
A 3 tome melody sounds
Power Off
A low beep sounds
Connected to Bluetooth MIC
A high beep sounds
Disconnected from Bluetooth MIC
A low beep sounds
Battery low
A high beep sounds 1 time every 5 seconds
Battery very low
A high beep sounds 2 times every 5 seconds
LED and Tone Indicators
Limited One Year Warranty
Bluetooth Microphone BTMIC Kit
Bluetooth SPEC : VERSION 2.1/Class 2
Bluetooth Profile : HSP (Headset Profile)
Specifications
Pairing the Blueetooth MIC with an
Optional Bluetooth Headset/Car Kit
2
1. Press & hold for 4 seconds the Bluetooth MIC’s
LINK button to start pairing mode. Put the optional
Bluetooth Headset into pairing mode (see
instructions for the Bluetooth Headset/Car Kit).
The Bluetooth MIC and the Bluetooth Headset/
Car Kit will pair automatically*.
*The PIN code for pairing is “0000”, this is
exchanged automatically.
²Only one Bluetooth Headset/Car Kit can be paired
with the Bluetooth MIC. Compatibility and full
operation is not guranteed.
To Delete Pairing Information
To Reset the Bluetooth MIC:
1. Press & hold for 4 seconds the Bluetooth MIC’s
LINK button while powering On the UHF CB
Mobile Radio.
To Reset the Remote PTT:
1. First power Off the Remote PTT.
2. Press & hold for 4 seconds TALK and
Power.
1. Press TALK on the Remote PTT to activate the
Bluetooth MIC’s PTT output.
• Pressing the optional Bluetooth Headset/Car Kit’s
Talk/connect button controls the audio connection.
• During a transmission using the Remote PTT
wired Headset or Bluetooth Headset/Car Kit, PTT
output is stopped when either device moves out
of range of the Bluetooth MIC.
• If the Bluetooth Headset/Car Kit is also paired
to a mobile phone, and a transmission is in
progress when an incoming call is received,
the transmission is stopped and the Bluetooth
Headset/Car Kit switches to the mobile phone call
3
.
• When the Bluetooth Headset/Car Kit ends a
mobile phone call, the audio connection will be
restarted either by pressing TALK on the Remote
PTT or by receiving a transmission.
3
If the optional Bluetooth Headset/Car Kit is multi-
point capable, you may switch to a mobile phone
call. This function depends on the specification of
your Bluetooth Headset/Car Kit. Compatibility and
full operation is not guaranteed.
At any time the Bluetooth MIC can be used just
like the Standard MIC for PTT, CALL and INSTANT
function. When using PTT on the Bluetooth MIC the
Bluetooth MIC’s microphone is used.
Bluetooth MIC
1. Bluetooth MIC automatically turns on when the
mobile radio powers on.
2. When the mobile radio has power:
Press LINK for 2 seconds to directly turn the
Bluetooth feature On or Off.
The LED flashes Blue 3 times when the
Bluetooth feature turns on.
The LED flashes Blue & Red when the
Bluetooth feature turns off.
Remote PTT
1. Press for 2 seconds to power on.
The LED flashes Blue 3 times when turned on
(connected headset will hear the turn on melody).
The LED flashes Blue & Red when turned off
(connected headset will hear a low beep tone).
Pairing the Bluetooth MIC with the
Remote PTT
The Bluetooth MIC and Remote PTT come already
paired for your convenience. If you need to pair the
Remote PTT to the Bluetooth MIC first do “Delete
Pairing Information”, then;
1. First power off both the Bluetooth MIC (LINK
button) and the Remote PTT.
2. Press & hold for 4 seconds both the Remote
PTT’s power key and the Bluetooth MIC’s LINK
button to start pairing mode. The Bluetooth MIC
and the Remote PTT will pair automatically, with
no need to enter a PIN code.
Basic Operation
Using the Bluetooth MIC as a Standard MIC
Using the Remote PTT to Transmit
Power On/Off
Pairing
IMPORTANT: Satisfactory evidence of the original purchase is required for
warranty service
Please refer to our Uniden website for any details or warranty durations offered
in addition to those contained below.
Warrantor:
The warrantor is either Uniden Australia Pty Limited ABN 58 001 865
498 (“Uniden Aust”) or Uniden New Zealand Limited (“Uniden NZ”) as the case
may be.
Terms of Warranty:
Uniden Aust/NZ warrants to the original retail purchaser
only that the BTMIC Kit (“the Product”), will be free from defects in materials and
craftsmanship for the duration of the warranty period, subject to the limitations
and exclusions set out below.
Warranty period:
This warranty to the original retail purchaser is only valid in
the original country of purchase for a Product first purchased either in Australia
or New Zealand and will expire one (1) year from the date of the original retail
sale.
If a warranty claim is made, this warranty will not apply if the Product is found by
Uniden to be:
(A) Damaged or not maintained in a reasonable manner or as recommended
in the relevant Uniden Owner’s Manual;
(B) Modified, altered or used as part of any conversion kits, subassemblies or
any configurations not sold by Uniden Aust or Uniden NZ;
(C) Improperly installed contrary to instructions contained in the relevant
Owner’s
Manual
(D) Repaired by someone other than an authorized Uniden Repair Agent in
relation to a defect or malfunction covered by this warranty; or
(E) Used in conjunction with any equipment, parts or a system not
manufactured by Uniden.
Parts Covered:
This warranty covers the Product and included accessories.
User-generated Data:
This warranty does not cover any claimed loss of or
damage to user-generated data (including but without limitation phone numbers,
addresses and images) that may be stored on your Product.
Statement of Remedy:
If the Product is found not to conform to this warranty
as stated above, the Warrantor, at its discretion, will either repair the defect or
replace the Product without any charge for parts or service. This warranty does
not include any reimbursement or payment of any consequential damages
claimed to arise from a Product’s failure to comply with the warranty.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
This warranty is in addition to and sits alongside your rights under either the
COMPETITION AND CONSUMER ACT 2010 (Australia) or the CONSUMER
GUARANTEES ACT (New Zealand) as the case may be, none of which can be
excluded.
Procedure for obtaining warranty service:
Depending on the country in
which the Product was first purchased, if you believe that your Product does
not conform with this warranty, you should deliver the Product, together with
satisfactory evidence of your original purchase (such as a legible copy of the
sales docket) to Uniden at the addresses shown below. You should contact
Uniden regarding any compensation that may be payable for your expenses
incurred in making a warranty claim. Prior to delivery, we recommend that you
make a backup copy of any phone numbers, images or other data stored on
your Product, in case it is lost or damaged during warranty service.
UNIDEN AUSTRALIA PTY LTD
Service Division
345 Princes Highway,
Rockdale, NSW 2216
Phone: 1300 366 895
Email: [email protected]
UNIDEN NEW ZEALAND LTD
Service Division
150 Harris Road, East Tamaki
Auckland 2013
Phone: (09) 273 8377
Email: [email protected]
Thank you for buying a uniden producT
© 2011 Uniden Australia Pty Ltd. Uniden New Zealand Ltd.
Printed in PRC. UUZZ01369ZA(0)
