18
Change the volume
Speaker and earpiece volume
Ringer volume
You can change the volume of
-
the speaker on the base and each
cordless handset separately.
You can change the volume of the
-
earpiece on each handset; this does
not affect the handset’s speaker
volume.
Anytime you are listening to a
-
speaker or earpiece, press
uP
to
increase the volume and
DowN
to
decrease it.
You can change volume of
-
the ringer on the base and
each handset separately.
Each cordless handset uses
-
the same ringer volume for
both the land line and the
cellular line.
When the phone is in
-
standby, press
uP
to
increase the volume and
DowN
to decrease it.
If you turn the ringer
-
volume all the way down,
the ringer turns off.
Call Waiting
Call Waiting is a service available from your telephone provider that
lets you receive calls while you are on another call. Caller ID on Call
Waiting (CIDCW) service displays Caller ID information for a waiting
call. You might have to subscribe to these services separately for your
landline and your cellular phones. Contact your telephone provider(s)
for more information.
When you get a Call Waiting call, the phone sounds a tone and displays
any CID information received for the waiting call.
For Australian Model:
Press
TaLk/fLash
on the handset and then press
2
to accept the waiting
call. The first caller is put on hold, and you will hear the new caller
after a short pause. To return to the original caller, press
TaLk/fLash
and then
2
again.