Uniden Bearcat PC78LTXFM Owner'S Manual Download Page 17

17

Code Meaning

Code

Meaning

10-19

Nothing for you, return to 
base 

10-65

Awaiting your next message/
assignment 

10-20

My location is 

10-67

All units comply 

10-21

Call by telephone 

10-70

Fire at 

10-22

Report in person to 

10-71

Proceed with transmission in 
sequence 

10-23

Stand by 

10-77

Negative contact 

10-24

Completed last assignment  10-81

Reserve hotel room for 

10-25

Can you contact 

10-82

Reserve room for 

10-26

Disregard last information 

10-84

My telephone number is 

10-27

I am moving to channel 

10-85

My address is 

10-28

Identify your station 

10-91

Talk closer to microphone 

10-29

Time is up for contact 

10-93

Check my frequency on this 
channel 

10-30

Does not conform to FCC 
rules 

10-94

Please give me a long count 

10-32

I will give you a radio check  10-99

Mission completed, all units 
secure 

10-33

EMERGENCY TRAFFIC 

10-200

Police needed at 

If you do not get satisfactory results after performing the above checks, 
visit www.uniden.com for further information.

FCC PART 15

Changes or modifications not expressly approved by the party 
responsible for compliance could void the user’s authority to operate the 
equipment.

This device complies with Part 15 of the FCC rules. Operation is subject to 
the following two conditions: 

(1) This device may not cause harmful interference, and 

(2) this device must accept any interference received, including 
interference that may cause undesired operation.

Summary of Contents for Bearcat PC78LTXFM





















Reviews: