E-13
4. Press
MENU/OK
to set Weather Scan mode to
ON
or turn the selec-
tion knob until
OFF
displays and then press
MENU/OK
to set it.
WXSCAN
displays again.
If Weather Scan is
ON
when you turn off the radio, it remains
ON
.
Left at these settings (WX mode, WX Scan), you will hear only weather
broadcasts and Weather Alert signals. To use your CB radio normally
while monitoring weather alerts, press
WEATHER
again.
Set Weather Alert Mode
Weather Alert mode only operates when you are in CB mode; it does not
operate in Weather mode. In CB mode, the radio sounds an alert tone
when it detects a 1050Hz tone on a weather channel.
Press and hold
WEATHER
to turn Weather Alert on.
ALERT
displays.
MEMORY MODE
You can store channels into memory and then scan only those channels.
Save Channels Into Memory
1. Tune to a channel in CB mode.
2. Press and hold
MEM/SCAN
until
SAVE
appears (about 2 seconds).
3. Release
MEM/SCAN
.
4. The radio stays on the saved channel.
Scan Channels in Memory
1. From All Channel Scan mode (see page 12), press
MEM/SCAN
until
MEM
and
SCAN
display; the radio scans memory channels
only.
2. Press
MEM/SCAN
again to return to MEMORY mode or the last
channel scanned.
Listen to Channels in Memory
1. Press
MEM/SCAN
until
MEM
displays.
2. Turn the
Channel Selector
knob to hear the channels you saved.
