Uniden Bearcat 880 CHR, Owner'S Manual

Page: 14 / 24

14
ƒ
DIAG - Diagnostics
– Battery Check
– Antenna Mismatch Check
– RF Power Check
ƒ
Exit
Select Backlight Color
1. Press
MENU/OK
to activate the menus. Turn
Channel Selector
until
COLOR
displays.
2. Press MENU/OK . Turn Channel Selector until
DAY
displays.
3. Press
MENU/OK
.
DAY
blinks.
4. Turn Channel Selector to cycle through the available backlight
colors or OFF. The selection number for that color displays in that
color. The available colors are:
Option
No:
Color
Option
No:
Color
0 None (Off) 4 Red
1 Blue 5 Magenta
2 Green 6 Yellow
3 Cyan 7 White
5. Press MENU/OK to select that color.
COLOR
displays.
6. Repeat these procedures to set the NIGHT backlight color.
Set LCD Contrast
1. Press MENU/OK to activate the menus. Turn Channel Selector
until
CONT
displays.
2. Press MENU/OK . Turn Channel Selector until
DAY
displays.
3. Press
MENU/OK
.
DAY
blinks.
4. Turn
Channel Selector
to cycle through the contrast options.
(Lowest = 00; Highest = 15)
5. Press
MENU/OK
to select the one you want.
CONT
displays again.
6. Repeat these procedures to set the NIGHT contrast level.
Set Brightness
1. Press
MENU/OK
to activate the menus. Turn
Channel Selector
until
BRIGHT
displays.