file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.html
The display icons vary depending on the status of the scanner and what youre doing at
any given time. The diagram shows common icon locations, and table below lists the
most common icons and their meanings:
Attenuator icon
Steady: The attenuator is turned on for the current
channel.
Blinking: The attenuator is turned on globally (for all
channels).
Battery level icon
x.xx: The remaining battery voltage is displayed in
place of the Xs.
Blinking icon: The battery is low. (If the AC adapter is
connected while the icon is blinking, the battery is
incorrectly installed, is the wrong type, or has gone
bad.)
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.html (1 of 4)4/7/2009 10:08:51 AM