59
Scroll to
Review/Edit System
and press
E/yes
.
Scroll to the
System
and press
E/yes
.
Scroll to
Edit Sys Options
and press
E/yes
.
Scroll to the following:
Review ID Avoids
- Scroll to each ID and press
E/yes
to Stop Avoiding.
Clear All ID Avoids
- At Confirm? press
E/yes
or
./no
.
Clear All Avoids for Site or Department
– Press
Channel
to hold on any System.
Press and hold
Avoid
.
quICK searCh
Press
Func
then
E/yes
to start Quick Search at the current frequency.
p25 adjustment mode
(BCD536HP) Press
Func
then
Vol
. Press
Func
then
Vol
to exit.
(BCD436HP) Press
Vol
then
Func
then
Vol
. Press Vol to exit.
Set the P25 Threshold mode to
Manual
in Site Options or System Options for a
Conventional channel.
Press
Func
then
Dept
to hold on a Site or
Channel
to hold on a digital Channel.
The first line on the display now shows the digital error rate and the decode threshold setting
(0-20). The second line on the display shows the decode threshold levels for the site.
Allow the scanner to monitor the site or channel for several minutes. The error rate should
drop for each transmission and the threshold levels should automatically adjust to a more
optimal setting. Then, once the threshold level settles to a stable setting, make a note of the
value. This is the site’s or channel’s optimum decode threshold.
Press
Func
and rotate the
Scroll Control
to set the
MAN
decode threshold start level to a
setting that most closely matches the system’s optimum decode threshold. Whatever you set
at this point will be remembered for this site as the starting point for the auto-tuning function
for subsequent transmission on site. See also P25 Threshold Level.
usInG a Gps
loCatIon-based sCannInG
You can connect the scanner to a compatible GPS device and set the scanner to automatically
Avoid and Unavoid Departments and Sites based on your current location. This frees you from
having to manually enable and disable Departments and Sites as you change locations.
APCO Decode
Error Rate
Threshold
Level
P25 Condition
Mode
Threshold
Voltage
