Installing the BC350A
For Home Use (Desktop Installation)
1.
Insert the DC plug end of the AC Adapter into the DC 13.8V jack on the
rear panel.
2.
Plug the AC Adapter into a standard 120V AC wall outlet.
Warning: Do not plug the AC Adapter into an outlet controlled by a
wall switch.
This could cause scanner memory loss.
3.
Plug the Telescoping Antenna into the ANT connector. Extend the an-
tenna to its full height. For frequencies higher than 406 MHz, shorten-
ing the antenna may improve the reception.
4.
Use the desktop stand for a better viewing and operating angle.
Helpful Hints
•
If strong interference or electrical noise is received, relocate the
scanner or its antenna away from the source.
•
If you are operating the scanner in a fringe area or need to im-
prove reception, use an optional antenna designed for multi-band
coverage. (You can purchase this type of antenna at a local elec-
tronics store.)
•
If the optional antenna has no cable, use 50-70 ohm coaxial cable
for lead-in. A mating plug may be necessary for the optional anten-
nas.
For Mobile Use (In-Car Installation)
Mounting the Radio
1.
Select an ideal location in your vehicle to mount the BC350A. Avoid a
location that could interfere with your driving. In a passenger car, the
ideal location is underneath the dashboard on the passenger side.
2.
Use the BC350A mounting bracket as a template for marking the loca-
tion of the mounting screws. Note: If there are screws already hold-
ing the dashboard, you can use the same screw holes to mount the
bracket.
3.
Drill the necessary holes and secure the mounting bracket in place us-
ing the screws provided.
4.
Mount the radio to the bracket only after the wiring has been connected
to the rear panel.
5
