Uniden BC346XT, User Manual

Page: 51 / 1059

SingleFrequencyP25TrunkedSystems < UnidenMan4 < TWiki
Single-Frequency P25 Trunked Systems
Single-frequency P25 systems are almost idfentical to standard P25 systems , except they
only have one site per system and the system can use a P25 network address. Here is a
conceptual layout diagram of a single-frequency P25 system ( click here for a legend of
the diagram).
●
Programming a Single-Frequency P25 System
❍
Create a system
■
System properties
■
Create exactly 1 site
■
Site properties
●
Programming a system for Scanning
❍
Create a channel group
■
Channel group properties
❍
Create a channel
■
Channel properties
Programming a Single-Frequency P25 System
To program a single-frequency P25 system, you'll need to program the required elements
in following order (
click here for information on using the menu ):
Create a system
1. Go to the Program System menu and choose New System .
2. The scanner will prompt you for the System Type. Select P25 .
3. When the scanner prompts you to select Standard Trunk or One-Freq Trunk
select One-Freq Trunk, then tap YES .
4. The scanner creates the system with a default name. Select Edit Name if you want
to change it.
5. If you need to change any of the system properties, you can do that now. Unless a
property is Required , you can operate the system without changing the default
settings.
file:///C|/Documents%20and%20Settings/POpitz/My%20Do..._090515/Manual/SingleFrequencyP25TrunkedSystems.html (1 of 5)5/26/2009 11:11:55 AM