background image

20

alarm, it will sound for 20 minutes, then reset to alert  

you again the following day.

USINg SNOOZE

When the alarm sounds, press the snooze bar to 

silence the alarm for 5 minutes.

LISTENINg TO AM/FM CHANNELS 

To listen to AM/FM channels, slide the mode 

selector to 

AM/FM 

when power is on. Press the button 

at the top of the scanner to select the desired source 

(AM for AM Broadcast, FM1 or FM2 for FM). Radio 

stations are programmed into 30 channels - 10 for AM 

and 20 for FM (FM1 and FM2).

DIRECTLY SELECTINg A CHANNEL

Press 

SVC/DIR

 to select the direct entry mode. Use 

the 

/

 buttons to step through the selected band. 

The scanner stops on active channels.
You can also enter the channel frequency using the 

keypad, enter the channel frequency (for FM or AM) 

and press 

E

.

USINg AM/FM CHANNEL MEMORY

Your scanner has 30 AM/FM channels for quick 

channel recall (10 for AM, 20 for FM1/FM2). 
To store a channel into memory: 

1.  Select the band (AM, FM1 or FM2). 
2.  Directly select the channel you want to store (see 

above). 

3.  While listening to the channel, press and hold 

the number button that corresponds to the channel you want to save the 

channel into for 2 seconds. The scanner switches to the Memory mode for 

the current band.

To quickly recall a channel:

1.  Select the band (AM, FM1 or FM2).
2.  Select the channel memory mode by pressing 

PRI/MEM

.

L

Sleep

Sleep

Summary of Contents for BC345CRS































Reviews: