1. While the scanner is receiving the talkgroup, press
HOLD/MAN
to hold on that talkgroup.
2. Press
TRNSFR
. The scanner displays the lowest
numbered empty ID group memory.
3. Use the scroll bar to select the memory you want to store
the ID into, then press
E
.
Deleting Stored Talkgroup ID’s
To delete a stored talkgroup ID:
1. While scanning a trunked system in the ID scan mode
(see “Scanning Only Stored Talkgroups”), press
HOLD/MAN
.
Or, to use the menu system:
2:SCAN OPTION
→
2:TRUNK
→
Select the
bank
→
3:TALK GROUP
2. Use the scroll bar to select the talkgroup ID you want to
delete, then press
E
.
3. Select 1:ID and press
E
.
4. Press
0
, then press
E
.
Adding a Text Tag to an ID List
To add a text tag to each of the 10 ID lists in each bank:
2:SCAN OPTION
→
2:TRUNK
→
Select the bank
→
5:ID LIST TAG
→
Select the list
→
Enter the
alpha tag
Seeing Talkgroup Activity
In the ID Scan mode, the scanner normally only displays the
ID for talkgroups that you have stored into a scan list. This
setting lets you see the ID’s for all talkgroups as they become
active when the scanner is monitoring the control channel.
The scanner still only switches to a talkgroup if you have
stored it into a scan list.
2:SCAN OPTION
→
2:TRUNK
→
Select the bank
→
7:ACTIVITY ID
1:ON
Display every talkgroup ID as it becomes active.
2:OFF
Only display active stored talkgroup ID’s.
60
BC296D(NEW) 10/16/03 6:35 PM Page 60
