63
Close Call Delay
This setting controls how long the scanner stays on the
frequency after a transmission ends before resuming Close Call
operation. If you select a minus delay time, the scanner stops
on the transmission for the preset time and then automatically
resumes scanning. (Default = 2 seconds)
1. Press Func then Hold to view the
Close Call
menu.
2. Scroll to
Set Delay
and press Pgm/E.
3. Scroll to select the delay time from following options:
• -10 sec - resumes after 10 seconds.
• -5 sec - resumes after 5 seconds.
• 0 sec - resumes immediately.
• 1 sec - waits 1 second for a reply then resumes.
• 2 sec - waits 2 seconds for a reply then resumes.
• 3 sec - waits 3 seconds for a reply then resumes.
• 4 sec - waits 4 seconds for a reply then resumes.
• 5 sec - waits 5 seconds for a reply then resumes.
4. Press Pgm/E to save and return to the
Close Call
menu.
Close Call CTCSS/DCS Search
This setting controls whether the scanner will search for a
subaudible tone when it stops on a transmission during Close
Call operation. (Default = On)
1. Press Func then Hold to view the
Close Call
menu.
2. Scroll to
CTCSS/DCS Search
and press Pgm/E.
3. Scroll to select one of the following options:
