7
levels with the
Channel Selector/MENU/OK
knob. (Levels 00 - 04)
If Talkback is on when MIC Gain is also on, Talkback volume increases.
Weather:
Press to toggle between Weather and CB channels. Turn
Channel Selector
to cycle through the 7 weather channels. (LED
off = CB channels; LED on = Weather channels)
Press and hold to turn Weather Alert on and off.
ALERT
displays.
Day/Night:
Adjusts LCD backlight sensitivity between Day and
Night modes. (LED off = Day; LED on = Night)
6.
Channel Selector/MENU/OK
. Press the inner
MENU/OK
button to
select a menu option or other selection. Turn the outer
Channel
Selector
knob to:
Select channels
Select menu modes
Change scan resume direction (up or down)
Control Talkback volume
Control Mic gain level
Control Calibration volume
All channels except Channel 9 may be used for normal communication. The FCC
reserves Channel 9 for emergencies involving the immediate safety of individuals
or protection of property. Use Channel 9 to render assistance to a motorist.
This is an FCC rule and applies to all CB operators.
7. Microphone socket.
8. Indicators turn on when the function is turned on.
9.
S/RF/CAL/SWR
: Push to to check RF signal strength, calibration,
and SWR reading.
10.
CB/PA:
Selects
CB
(Citizens Band) or
PA
(Public Address).
Do not use the
PA
function unless an external speaker is connected.
11.
MEM/SCAN
: Press to start or stop scanning modes [All Channel
Scan (see page 11) and Memory Scan (see page 13)]. Press
and hold to set or clear channel memory while in Memory mode.
12.
9/19/NORM
: Press to switch between emergency channel 9,
channel 19, and standard CB channels.
