E-11
Uniden Atlantis 275 Radio Owner’s Manual
Using the radio in scan mode
x
To activate scan mode, press
SCN DUAL
.
x
You must have at least two channels in memory to start
a scan.
x
You cannot transmit while in scan mode.
x
To save a channel into memory, select the channel,
then press the
MEM SOS
key. The
MEM
icon displays
whenever you tune to that channel.
x
To remove a channel from memory, set the radio to that
channel, then press the
MEM SOS
key. The
MEM
icon
no longer displays.
x
When the radio stays on a channel, press
to leave that
channel and resume scanning.
x
Pressing
16/9 TRI
while in Scan mode pauses scanning
and immediately goes to emergency channel 16. Press
again to go to channel 9. Press a third time to resume
scanning.
x
To end the scan, press the
SCN DUAL
key again; the
radio remains on the last scanned channel.
#
+:2>- '- ?
""
Scan mode with Weather Alert Watch
If you activate Weather Alert Watch while in scan mode, the
radio checks the most recently-used weather channel every
seven seconds, then continues scanning the next channel in
memory:
Every few seconds, the radio
checks the last-used weather
channel, then scans the next
channel.
wx
WX Alert
Watch on
Memory Channel Scan
08
25
24
17
15
14
13
12
11
10
20
