Uniden Atlantis 155, Owner'S Manual

Page: 20 / 84

E-20 Uniden Atlantis 155 Owner’s Manual
SCAN MODE OPERATION
You can save channels into memory and then use scan mode
to monitor those channels from lowest to highest. If the radio
detects a signal on a channel, it stays on that channel as long
>@
continues scanning.
,$&&
x
To activate scan mode, press
SCAN MEM
.
x
You must have at least two channels in memory to start a
scan.
x
To save a channel into memory, select the channel, then
press and hold the
SCAN MEM
key. The MEM icon displays
whenever you tune to that channel.
x
To remove a channel from memory, set the radio to that
channel, then press and hold the
SCAN MEM
key. The MEM
icon no longer displays.
x
>
CH
or
CH
to
leave that channel and resume scanning.
x
To end the scan, press the
SCAN MEM
^ @
remains on the last scanned channel.
&*+*
* > >> $~
and hold
WX ALERT
), the radio checks the most recently-
used weather channel every seven seconds, then continues
11 10 08 13 12
14
17
15
The radio scans about
5 channels in 0.5 seconds.
When it detects a signal, the radio
stays on the channel until you press
the CH ] or CH \ button or the
signal stops.
Resume
scan