Uniden ANA9620, Owner'S Manual

Page: 20 / 32

USING THE FEATURE BUTTONS
▼
Placing a Call “on Hold”
Press
HOLD
. You will hear a “beep”
and see:
To resume the call, press
L1
or
L2
or
talk
.
▼
Transferring A Call
The
XFER
key must be programmed before use.
Refer to the “PROGRAMMING XFER IN PBX”
section.Press
XFER
(TRANSFER),
you will hear a “beep,”
and you will see:
Dial the target number.
When the receiving party answers, press
XFER
to complete
the transfer.
▼
Connecting a PBX Conference Call
Refer to the “PROGRAMMING CONF IN PBX” section.
1. To connect a second party to a call in progress,
press
CONF
(CONFERENCE).
You willl hear a “beep,” and see:
2. Dial the second party’s number.
3. When the other party answers,
press
CONF
to have a three-way conversation.
19
FEA
TU
RES
PBX
F
E
A
T
UR
E
S
NOTE
The exact operation of the
Feature Buttons depends
on how your PBX system is
configured. Contact your
PBX Administrator for
more information.
talk
3410
Note:The transfer feature is not available in PSTN mode.
Note:In PBX mode, multiline conferencing is available
according to the configuration of the PBX system..
C:\ana9620-1\ANA9620-1.vp
Fri Jul 31 12:35:50 1998
Color profile: Disabled
Composite Default screen