2
Adding Accessory Handsets
Your.phone.supports.up.to.ten.(0).handsets,.including.any.handsets.supplied.with.your.phone..Accessory.handsets.
do.not.need.to.be.connected.to.a.phone.jack..You.can.now.place.a.fully-featured.cordless.handset.anywhere.AC.
power.is.available.to.connect.the.handset.charger..All.the.handsets.ring.when.a.call.is.received.
Compatible Handsets
Your.phone.is.compatible.with.the.
TCX930
..If.you.purchase.an.accessory.handset,.you.must.register.the.handset.to.
the.base.before.use..Accessory.handsets.will.not.operate.until.they.are.registered.
Charging Accessory Handsets
The.handset.is.powered.by.a.rechargeable.battery.pack..The.battery.recharges.automatically.when.the.handset.is.
placed.in.the.charger..
Connect.the.AC.adapter.to.the.DC.IN.9V.jack.and.to.a.20V.
AC.outlet.that.is.not.controlled.by.a.wall.switch.
Caution:.Use.only.the.Uniden.AD-0005.adapter.
Set.the.charger.on.a.desk.or.tabletop,.and.place.the.handset.
in.the.charger.with.the.keypad.facing.forward.
Make.sure.that.the.charge.LED.illuminates..If.the.LED.does.
not.illuminate,.check.to.see.that.the.AC.adapter.is.plugged.
in.and.the.handset.makes.good.contact.with.the.charging.
contacts.
Charge.the.handset.battery.pack.for.at.least.5-20.hours.
before using your new cordless telephone for the first time.
)
2)
3)
4)
Route the
cord.
To AC outlet
To DC IN 9V
AC adapter (supplied)
Route the
cord.
To AC outlet
To DC IN 9V
AC adapter (supplied)
