manualshive.com logo in svg

Uniden 1535+1, Owner'S Manual

Share
Download
Uniden 1535+1 Owner'S Manual Download Page 25

25

 SOLVING PROBLEMS

If you have any trouble with your phone, try these simple steps first. If 

you need help, visit our website listed on the front cover.

If…

try…

No handsets can make 

or receive calls.

 

-

Checking the telephone cord connection.

 

-

Disconnecting the base AC adapter. Wait a 

few minutes, then reconnect it.

 

-

Making sure the base is plugged in.

A handset can’t make 

or receive calls.

 

-

Moving the handset closer to the base.

A handset can make 

calls, but it won’t ring.  

-

Making sure the ringer is turned on.

A handset is not 

working.

 

-

Charging the battery for 15-20 hours. 

 

-

Checking the battery connection.

A handset says 

Unavailable

.

 

-

Moving the handset closer to the base.

 

-

Seeing if another handset is in Privacy Mode.

No handsets display 

Caller ID information.

 

-

Letting calls ring twice before answering.

 

-

Making sure your Caller ID service is active.

Caller ID displays 

briefly & then clears.

 

-

You may have to change the line mode. 

Contact Customer Service for instructions.

I can’t transfer calls.

 

-

You may have to reset the handset. Contact 

Customer Service for instructions.

Two handsets can’t 

talk to the caller. 

 

-

Making sure no handset is in Privacy Mode.

The answering system 

does not work.

 

-

Making sure the answering system is on.

 

-

Making sure the base is plugged in.

The system won't 

record messages.

 

-

Making sure the 

Record Time

 is not set to 

Announce Only

.

 

-

Deleting messages (memory may be full).

A handset can't access 

the answering system.

 

-

Seeing if another handset is using the system.

 

-

Making sure the phone is in standby.

Summary of Contents for 1535+1





































Reviews:

No comments

Brands by name

Popular brands

Load more brands