40
FirmWare upgrade
There are two way to set Firm ware update. The first one is input address in menu via the key pad;
another one is upgraded by Autoprovisoning server automatically.
1
Select
“
6.Firmware Upgrade
”
in System mode.
2
Select protocol, input IP and File name. .
“
procotol/server.IP/filename.ini
In case of server with HTTP, 192.168.1.10 and unidata.ini, enter
“
HTTP/192.168.1.10/unidata.ini
”
3
Frimware will be updated.
It can not be upgraded if the Firmware version is same or less
than. Make sure that the server should be root directory.
Don
’
t tune the phone off during update. Make sure
battery is enough. Power off during update will cause phone
malfunction.
