UniData Communication Systems Neon 2000 Family, Manual

Page: 13 / 23

Manual – 2024F Neon Bore Hole Telemetry Module
Unidata Manual - 2024F Neon Bore Hole Telemetry Module - 20 04 2016.docx Page 11
6.3 NBHTM Signal Strength Verification

Connect a laptop computer to the NBHTM.

Launch the STARLOGV4 application.

Press the ‘Select’ icon and select the scheme corresponding to the NBHTM.

Click on the ‘Configure/Initialise’ button to open the “NRT/NMM Configuration Tool”
dialog

Press the ‘Retrieve NRT Settings’ button at top right of the dialog

Press the ‘Signal Strength’ button. After a short delay (10 seconds or so), the RSSI
signal strength will be displayed. RSSI must be 16 or higher. If it is 99 then there is
no connection to the cellular network.


If there is sufficient signal, press the Cancel button to exit the Signal Strength option.
6.4 NBHTM Initialisation

Reconnect to the NBHTM if not already connected.

Launch STARLOGV4 (laptop computer) application.

Press the ‘Select’ icon and select the scheme corresponding to the NBHTM

Click on the ‘Configure/Initialise’ button to open the “NRT/NMM Configuration Tool”
dialog

Press the ‘Retrieve NRT Settings’ button at top right of the dialog