manualshive.com logo in svg

UniData Communication Systems 6541, Manual, Page: 39 / 49

Share
Download
UniData Communication Systems 6541 Manual Download Page 39

Precision Water Level Instrument 

Unidata Manual 6293 - Precision Water Level Instruments Issue 2.1 

35

 

 

„

 

Model 6541F-170 

This float is designed to produce high precision data at most sites with 6541 
Instruments. It is constructed of PVC and may be used in floatwells with a 
minimum diameter of 200mm. The float has a cylindrical shape with a flat 
bottom for maximum sensitivity. It is suited for use at intermittently dry wells 
where the float may rest on the bottom. 

Dimensions:  Cylinder 170mm diameter and 

85mm high. 

Materials:  PVC pipe and fittings. 

Stainless Steel eye bolt for float 
line. 
Ballasted to float at the centreline 
when used with a 160g 
counterweight. 

Weight: 1100g. 

 
 

„

 

Model 6541F-115 

This float is suitable for sites where a 6541 is installed and the water level range 
is small, or a lightweight floatline is used. This float is designed for use in a 
floatwell with a minimum diameter of 150mm. The float has a cylindrical shape 
with a flat bottom for maximum sensitivity. It is suited for intermittently dry 
wells where the float may rest on the bottom. 

 

Dimensions:  Cylinder 115mm diameter and 

60mm high. 

Materials:  PVC pipe and fittings. 

Stainless Steel eye bolt for float 
line. 
Ballasted to float at the centreline 
when used with a 160g 
counterweight. 

Weight: 500g. 

 

Summary of Contents for 6541


















































Reviews:

No comments