Manual – Starflow Ultrasonic Doppler Instrument
Model 6526
Unidata Manual - 6526 Starflow User Manual Issue 17 01 2020.docx
Page 36
You should select the named scheme (in this case “Starflow”) and load its Test Display.
The Test Mode window is divided into four sections:
1.
Scheme Information
2.
Log Information
3.
Scheme Channels
4.
Log Buffers
Each of these items is explained in detail below.
8.1
Scheme Information
The Scheme Information section has the following items:
•
Scheme Name
: The name of the scheme programmed into the logger.
•
Logger Time
: The date/time of the logger.
•
Logger State
: One of
Primed
,
Logging
, or
Stopped
:
Primed
: The logger hasn’t yet started logging. Loggers with no built-in instruments (excluding
internal battery and temperature sensors) will not start logging until three scans have passed since
a plug was connected to their “Input Signals” connector.
Logging
: The logging is sampling and recording data.
Stopped
: The logger is not recording. This may be because the inputs have been unplugged, or
the logger Main Buffer has filled
•
Scan Rate
: The time between consecutive samples of the inputs.
Note: In this Test mode you can also increase the font to a larger size by pressing the (+) sign on
your keypad; this is especially useful for field situations.
8.2
Log Information
