Page 21
Version 3.3 / November 2016
3.4.9 Waste container
The container is located in the bottom of the vending machine
(see figure 40). In the bottom of the body there is a special marked
area for secure placement of the waste container.
After placing the empty container in the specified spot and fixing
it, direct the discharge pipe into the waste container and lower
the float into the container. This float will help monitor the level of
liquid in the container. The liquid waste results from the making
of the drinks and automated flushing of the vending machine.
When the level of liquid in the container reaches its maximum,
the sensor connected to the float (see figures 41 a, b) activates
and the vending machine is blocked or put offline. To unblock the
machine it is necessary to empty the container and dump errors
(see section 4.0 “Service mode”).
Figure 40
Figure 42
Figure 43
Figure 41b
Sensor-switch
Figure 41а
Apart from liquid waste the vending machine also
generates hard waste in the shape of used ground cof-
fee, which results from the preparation of coffee from
coffee beans. This waste is sent by the coffee group to
the path for hard waste (see figure 42).
A waste bag (not supplied with the product) must be
put over this waste discharge path. This can be done by
wrapping the bag around the discharge tube and fixing
it with a metallic clamp (ring clamp) (see figure 43).
