12
KW-Series | Version 1.03
Operation
8 Operation
8.1 Operators
Turning on / off
Step 1: Press 1 Sec.
, the balance is now on. The ba-
lance carries out the initialization and the boot-up
test, then the display flashes three times and shows
the max. Capacity, battery operation on after the
weight and auto zero is detected.
Step 2: Press 1 Sec.
or
, if you want to switch
off the scale. The balance will indicate the battery
charge level and off message, then the power will
be turned off.
Zeroing
Step 1: Press
or
, if you want to bring the
balance into zero position. The symbol
ZERO
shines.
a)The balance must not be locked, otherwise
the symbol
will be displayed.
b) The balance should be stable, otherwise the
symbol will
be
displayed.
c)The balance must not be tared, otherwise the
symbol
will be displayed.
d) The weight should be in the manual zero
range, otherwise the symbol
will
be displayed.
Tara on / off
Step 1: Press
or
in gross mode, the balance
is now in tare mode. The symbol
TARE
shines.
a) The balance must not be locked, otherwise
the symbol
will be displayed.
b)The balance should be stable, otherwise the
symbol will be
will be displayed.
c) The weight must be greater than 0, other-
wise the symbol
will be dis-
played.
d) The weight must not exceed 100% of the
max. Capacity, otherwise the symbol
will be displayed.
Step 2: Press
or
in net mode -> the tare
mode is now off. The Symbol
TARE
shines.
a) The balance must not be locked, otherwise
the symbol will be
displayed.
Locking / unlockingif you want to lock the scale. The symbol
Step 1: Press
or
, if you want to lock the
scale. The Symbol
HOLD
shines.
a) The balance should be stable, otherwise the
symbol will bel
displayed.
Step 2: Press
or
, if you want to unlock the
scale. The symbol
HOLD
ist out now.
Accumulate
Step 1: Press
, if you want to accumulate the cur-
rent weight.
Step 2: The Symbol
indicates that the weight is
accumulated. The balance uses the displayed
weight to add the gross or net weight to the same
register.
a) The balance must not be locked, otherwise
the symbol will be
displayed.
b) The balance should be stable, otherwise the
symbol will be
displayed.
c) The weight must be greater than 0, other-
wise the symbol be
displayed.
d) The display should first show zero before a
new weight is accumulated, otherwise the
symbol will be
displayed.
Display view
Step 1: Press
,if you want to enter View mode.
The accumulated weight then flashes on the dis-
play.
a) The balance must not be locked, otherwise the
symbol
will be displayed.
b) If the accumulated weight is "0", the symbol
will be displayed.
Step 2: By pressing the button
or
the quality
of the display of the digital display can be adju-
sted.
Step 3: Press
or
, if you want to leave the
view mode.
Delete (last entry)
Step 1: Press
, if you want to clear the last accumu-
lated weight.
Step 2: The symbol
indicates that the last accu-
mulated weight has been cleared.
ATTENTION!
The delete function can only delete the last weight!
