unicraft EWH Series Instruction Manual Download Page 6

6

EHW-Series | Version 1.02

Intended Use

2.6 General safety instruction

The valid accident prevention regulations must be follo-
wed. If the Electric lift truck is intended for use by em-
ployees, the relevant labour law regulations must also be 
observed, e.g. accident prevention regulation VBG 36. 

The surface on which the Electric lift truck stands and on 
which it is moved must be sufficiently stable, firm and le-
vel.

2.7 Inspections and Approvals

According to VBG 36 (BGV D27), the lift truck must be 
inspected by an expert as required, but at least once a 
year.

3

Intended Use

The electric pallet truck is an electrically operated con-
veyor and is designed for lifting, lowering and transpor-
ting palletized loads on level and paved roads up to the 
specified maximum load. The lift truck is designed for the 
unit load transport of standardized pallets, grid boxes 
and other palletized loads in internal traffic. The lift truck 
must not be used in rooms with explosion hazards or en-
vironments with aggressive materials.

The electric lift truck may only be operated by instructed 
persons. It must be in technically perfect condition. Pos-
sible damages or malfunctions must be eliminated im-
mediately.

Proper use also includes compliance with all information 
in this manual. Any use beyond the intended use or any 
other use is considered as misuse. 

 

The company Stürmer Maschinen GmbH does not ac-
cept any liability for design and technical modifications to 
the electric lift truck. 

Claims of any kind for damage due to improper use are 
excluded. 

3.1 Foreseeable misuse

If the electric pallet truck is used as intended, no reaso-
nably foreseeable misuse is possible which could lead to 
dangerous situations with personal injury.

3.2 Residual risks

Even if all safety regulations are observed, a residual risk 
remains when operating the electric lift truck as descri-
bed below. All persons working with the electric pallet 
truck must be aware of these residual risks and follow 
the instructions to prevent these residual risks from cau-
sing accidents or damage. 

During operation there is a risk of crushing the lower 
limbs. 

During setup and set-up work it may be necessary to re-
move protective devices provided by the customer. This 
results in various residual risks and potential dangers, 
which every operator must be aware of.

NOTE!

The improper use (misuse) of the electric lift truck as 
well as the disregard of the safety regulations or the 
operating instructions exclude any liability of the 
manufacturer for resulting damages to persons or 
objects and cause the warranty claim to expire!

WARNING!

The Electric lift truck is not intended for the transport 
of persons. It is also forbidden to sit on the device 
and drive it.

Summary of Contents for EWH Series



















































Reviews: