background image

ENDAT-GX201 USER’S MANUAL 

UNICORN COMPUTER CORP. 

 

- 1 - 

ENDAT-GX201 

User’s Manual 

Rev. 1A 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

For GX201 PCB ver. 1C or later 

 

03/02/2007

 

ENDAT-GX201 USER’S MANUAL 

UNICORN COMPUTER CORP. 

 

- 2 -

Copyright Notice 

The content of this manual has been checked for accuracy. The manufacturer 
assumes no responsibility for any inaccuracies that may be contained in this 
manual. 

The manufacturer reserves the right to make improvements or 

modification to this document and/or the product at any time without prior 
notice.

  No part of this

 

document may be reproduced, transmitted, photocopied or 

translated into any language, in any form or by any means, electronic, mechanical, 
magnetic, optical or chemical, without the prior written permission of the 
manufacturer. 

AMD is registered trademark of AMD Technology Incorporation 

GEODE and GEODE GX is registered trademark of AMD Technology Incorporation 

Realtek is registered trademark of Realtek Technologies Inc. 

Multiscan is a trademark of Sony Corp of America 

IBM, EGA, VGA, PC/XT, PC/AT, OS/2 and PS/2 are registered trademarks of 
International Business Machines Corporation 

Intel is a registered trademark of Intel Corporation 

Plug and Play is registered trademarks of Intel Corporation 

Microsoft, Windows and MS-DOS are trademarks of Microsoft Corporation 

AMI is a trademark of American Megatrends Inc. 

PCI is a registered trademark of PCI Special Interest Group 

Other product names mentioned herein are used for identification purpose only and 
may be trademarks and/or registered trademarks of their respective companies. 

Installation Notice 

The manufacturer recommends using a grounded plug to ensure proper 
motherboard operation. Care should be used in proper conjunction with a grounded 
power receptacle to avoid possible electrical shock. All integrated circuits on this 
motherboard are sensitive to static electricity. To avoid damaging components from 
electrostatic discharge, please do not remove the board from the anti-static packing 
before discharging any static electricity to your body, by wearing a wrist-grounding 
strap. The manufacturer is not responsible for any damage to the motherboard due 
to improper operation.

 

Summary of Contents for ENDAT-GX201


































Reviews: