User’s Manual
17
Function Jumpers/Connectors
IDE 2 Connector
J2
FDD Connector
CN2
Header for Case Panel
J4
IDE 1 LED
J4
Pin 1, Pin 2
IDE 2 LED
J4
Pin 3, Pin 4
External Speaker
J4
Pin 5, Pin 8
Onboard Buzzer
J4
Pin 6, Pin 7
Reset Switch
J4
Pin 9, Pin 10
Power LED Indicator
J4
Pin 13, Pin 14
ATX Power On/Off Switch
J4
Pin 15, Pin 16
Turbo LED (for case only, no function)
J4
Pin 17, Pin 18
ATX or PS/2 Power Selector
J4
Pin 19, Pin 20, Pin 21
Modem Ring Detected / Wake on LAN
J4
Pin 22, Pin 23
Note:
The cooling fan and heat sink are required for Pentium processors. Please
pay close attention to the direction of the CPU and cooling fan when
install. Position the cooling ventilator directly facing the regulator heat
sink, which is located beside the CPU socket. This will reduce the
overheating of the regulator and increase the reliability of the system.
18
ENDAT-5701 and ENDAT-5901 All-In-One motherboard uses
ENDAT-5901 CPU Vcore Setting: Switch 2 (S2: SW1-SW5)
VCORE=3.5V
S1 S2 S3 S4 S5
ON ON ON ON OFF
VCORE=3.4V
S1 S2 S3 S4 S5
OFF ON ON ON OFF
VCORE=3.3V
S1 S2 S3 S4 S5
ON OFF ON ON OFF
VCORE=3.2V
S1 S2 S3 S4 S5
OFF OFF ON ON OFF
VCORE=3.1V
S1 S2 S3 S4 S5
ON ON OFF ON OFF
VCORE=3.0V
S1 S2 S3 S4 S5
OFF ON OFF ON OFF
VCORE=2.9V
S1 S2 S3 S4 S5
ON OFF OFF ON OFF
VCORE=2.8V
S1 S2 S3 S4 S5
OFF OFF OFF ON OFF
VCORE=2.7V
S1 S2 S3 S4 S5
ON ON ON OFF OFF
VCORE=2.6V
S1 S2 S3 S4 S5
OFF ON ON OFF OFF
VCORE=2.5V
S1 S2 S3 S4 S5
ON OFF ON OFF OFF
VCORE=2.4V
S1 S2 S3 S4 S5
OFF OFF ON OFF OFF
VCORE=2.3V
S1 S2 S3 S4 S5
ON ON OFF OFF OFF
VCORE=2.2V
S1 S2 S3 S4 S5
OFF ON OFF OFF OFF
VCORE=2.1V
S1 S2 S3 S4 S5
ON OFF OFF OFF OFF
VCORE=2.0V
S1 S2 S3 S4 S5
OFF ON ON ON ON
VCORE=1.95V
S1 S2 S3 S4 S5
ON OFF ON ON ON
VCORE=1.90V
S1 S2 S3 S4 S5
OFF OFF ON ON ON
VCORE=1.85V
S1 S2 S3 S4 S5
ON ON OFF ON ON
VCORE=1.80V
S1 S2 S3 S4 S5
OFF ON OFF ON ON
☛
Please make sure the CPU Vcore voltage and setting as mention