User’s Manual
23
․
Delay for HDD (Secs)
Some HDD require some spin-up time in order to be identified correctly. This
settings specifies how long the BIOS has to wait. Set this as low as possible to
boot faster.
․
Display Small Logo
Show small energy star logo during BIOS boot up process.
․
Thermal Management
To set CPU’s thermal control rule to protect CPU from overheat.
Thermal Monitor 1: On-die throtting
Thermal Monitor 2: Ratio & VID transition
․
TM2 Bus Ratio
This item sets the frequency (bus ratio) of the throttled performance that will be
initiated when the on die sensor goes from not hot to hot.
․
TM2 Bus VID
To set the voltage of the throttled performance that will be initiated when the on die
sensor goes from not hot to hot.
3-3. Advanced Chipset Features
This section allows you to configure the system based on the specific features of
the installed chipset. This chipset manages bus speeds and the access to the
system memory resources, such as DRAM and the external cache. It also
coordinates the communications with the PCI bus.
It must be stated that these
items should never be altered. The default settings have been chosen because
they provide the best operating conditions for your system. You might consider
making any changes only if you discover that the data has been lost while using
your system.
Item
Available Options:
DRAM Timing Selectable
By SPD
CAS Latency Time
Active to Precharge Delay
DRAM RAS# to CAS# Delay
DRAM RAS# Precharge
