30
The ENDAT-4946i/M System Board
․
ACPI Function
This function should be enabled only in operating systems that support ACPI.
Currently, only Windows® 98SE/2000/ME/XP supports this function. When this
field is enabled, the system will ignore the settings in the “Suspend Mode” and
“HDD Power Down” fields. If you want to use the Suspend to RAM function,
make sure this field is enabled then select“S3 (STR)” in the field below.
․
ACPI Suspend Type
This field is used to select the type of Suspend mode.
S1(POS)
Enables the Power On Suspend function.
S3(STR)
Enables the Suspend to RAM function.
S1 & S3
If S3 state is supported by the system, by default [S3] is
automatically selected. Otherwise [S1] is selected.
․
Power Management
This field allows you to select the type of power saving management modes.
․
Video Off Method
This field defines the Video Off features.
Blank Screen
Writes blanks to the video buffer.
V/H SYNC + Blank
Enables the Suspend to RAM function.
DPMS
Allows BIOS to control the video display.
․
Soft-Off by PWR-BTTN
This field defines the power-off mode when using an ATX power supply.
․
CPU THRM-Throttling
When the system enters Doze mode, the CPU clock runs only part of the time.
You may select the percent of time that the clock runs.
.
