UB4B0 User Manua
l
14
3. Click the receiver settings button to configure the NMEA message output. It is
recommended to configure GPGGA, GPGSV, and other messages.
Fig
3-3
configure NMEA output
4. Click the receiver settings button, configure the NMEA message output, and click
send. It is recommended to configure GPGGA, GPGSV, and other statements. or
5. In the dialog window, click on "Send all Message" to complete all the NMEA message
output (update rate 1Hz). Right click in the data session window to adjust: output log
font size, stop / resume log output, or clear log content
6. Configure or type commands according to requirements in various UPrecise views
4
Firmware Update
（
WinConfig
）
WinConfig(in the attached CD) software is used for the remote update of UB4B0,
please follow the steps below to install the software:
During the firmware update of the board, please stop all the operations to
the device, including the cutoff of the power supply.
