Rack Mounting
To stack the Media-Chassis/10 in a standard 19” EIA rack, use the
supplied mounting kit. This kit contains 2 side-mounting brackets and
10 bracket screws.
Position one bracket to align with the holes on one side of the chas-
sis. Secure it with the smaller bracket screws and then attach the
remaining bracket to the other side of the chassis.
Position the chassis in the rack by lining up the holes in the brackets
with the appropriate holes on the rack. Secure the chassis to the rack
with a screwdriver and rack-mount screws (not included). Apply the
rubber foot pads to each corner on the bottom of the Chassis. These
pads cushion the chassis against shock/vibration.
Connect the power cord. The power supply is self-adjusting for AC
input power between 110 and 220 Volts.
Note: For proper ventilation, allow about 6 inches of clearance on all
sides of the Chassis. This is especially impor tant for enclosed rack
installations
Introduction
Congratulations on purchasing a quality UNICOM product.
Unicom’s
VELOCITY Series
represents the newest, most advanced
generation of signal conversion technology.
The Media-Chassis/10 is a heavy duty enclosure that provides compact
management of up to 10 optional modular conver ter units. This
management creates a flexible networking environment. Also, all conver ter
bays in the chassis are isolated from the power bus making the conver ters
hot- swappable.
Key Features
■
Suppor ts up to 10 Velocity Series conver ters*
■
All Velocity Series Conver ter are hot-swappable
■
Rackmount or desktop compatible
■
Standard 19” brackets included
■
FCC Class A, CE mark cer tification
*Available Velocity
™
Series Converters
Par t Number
Description
n
FEP-5300TF-C
10/100TX to 100FX (SC/MM/2km)
FEP-5300TF-T
10/100TX to 100FX (ST/MM/2km)
FEP-5400TF-C
10/100TX to 100FX (SC/SM/15km)
FEP-5401TF-C
10/100TX to 100FX (SC/SM/30km)
FEP-5402TF-C
10/100TX to 100FX (SC/SM/60km)
GEP-5000TF-C
1000T to 1000SX (SC/MM/500m)
GEP-5100TF-C
1000T to 1000LX (SC/SM/10km)
5
2
