CB-320
INSTRUCTION MANUAL
PAGE
17
PAGE
16
CB-320
INSTRUCTION MANUAL
MENU
The menu key is used to set the various feature settings. The following chart shows the
order of these selections.
#
Description
Symbol
Options
00 FM Radio (87–108Mhz)
UP/DOWN
to change
FM
ON/OFF
01 Button Beep selection
ON/OFF
02 Squelch level setting
0 - 9
03 Transmitter Power (default HIGH, no symbol)
LOW
HIGH/LOW
04 VOX settings
VOX
ON/OFF
05 Power on message
MSG/DC/OFF
06 Receiver CTCSS/DCS
CT/DCS
OFF/01 – 50/
001 - 208
07 Transmitter CTCSS/DCS
CT/DCS
OFF/01 – 50/
001 - 208
08 Keypad Lock
MANU/5 – 30
09 To add or remove scan channels
SCN
ADD/DEL
10 To start the scanning
11 Duplex (channels 1 – 8 and 41 – 48 only)
F
ON/OFF
NOTE:
CTCSS/DCS and transmit power settings are inhibited on channels 5/35 (emer-
gency channel).
USING THE MENU
To access the Menu, press the
MENU
key then the menu options will appear in the order
listed above. Press MENU again to enter the selected option then
UP/DOWN
to change
it. Press
MENU
to confirm the change or
EXIT
to go back.
FM RADIO
To listen the FM broadcast radio range from 87Mhz – 108Mhz. While in the FM radio
mode, press
UP/DOWN
to change the radio frequency.
To go to FM Radio Mode
1. Press the
MENU
key to enter the menu option.
2. Press
UP/DOWN
repeatedly until ‘RADIO’ is displayed (Option #00).
3. Press
MENU
to enter the selected option and
UP/DOWN
to change the frequency.
BUTTON BEEP
The Button Beep allows the radio to sound a confirmation beep whenever the keys are
pressed.
To Turn the Button Beep ON or OFF
1. Press the
MENU
key to enter the menu option.
2. Press
UP/DOWN
repeatedly until ‘BEEP’ is displayed (Option #01).
3. Press
MENU
to enter the selected option and
UP/DOWN
to select ‘ON’ or ‘OFF’.
4. Press
MENU
to confirm the change and store your selection.
5. Press
EXIT
to go back to standby.
SQUELCH LEVEL SETTING
The squelch is designed to keep the radio quiet when there are no signals present. The
squelch setting adjusts the sensitivity of the squelch to incoming signals. Higher squelch
settings require stronger signals to overcome the squelch and be heard in the speaker
while lower settings allow much weaker signals to be heard.
To set the Squelch
1. Press the
MENU
key to enter the menu option.
2. Press
UP/DOWN
repeatedly until ‘SQL’ is displayed (Option #02).
3. Press
MENU
to enter the selected option and
UP/DOWN
to adjust the Squelch level
from 0 (most sensitive) to 9 (least sensitive). (We recommend level 5).
4. Press
MENU
to confirm the change and store your selection.
5. Press
EXIT
to go back to standby.
TRANSMITTER POWER
The transmitter power can be set to High (default, no symbol on LCD) or low (LCD dis-
plays
LOW
). The power setting applies to the selected channel.
