Unicol VCC1 Quick Start Manual Download Page 4

Page: 4 / 4

Revised 28/09/22

01865 767676

www.unicol.com

STEP 3 – Fix covers (loosely) to the Strap connecting bars with the 4 x M10 x 25 hex screws provided. Lift

the whole unit to the desired height and tighten studding so that it clamps the straps to the pillar. Tighten

cover screws. The VCC1 has an arm on one cover only. The VCC2 has arms on both covers.

STEP 4 – Connect direct fitting adapter (ordered separately) to peg for screen or projector suspension.

A through bolt (supplied with the adapter) must be used to connect the adapter to the peg. Take up any

slack using the grub screws in the adapter socket.

PS1 Screen

Adapter shown

Summary of Contents for VCC1

Page 1: ...m load capacity Please also layout all components to ensure that you have all of the required parts before proceeding see BOM list on following page Use of this product for anything other than its spe...

Page 2: ...5 1 2 EQUIPMENT QTY 1 Straps 2 2 Connecting Bars 4 3 Studding with Fixings 4 4 Fixing Cover VCC1 VCC2 1 0 5 Fixing Cover with Arm VCC1 VCC2 1 2 3 4 5 NOTE Each VCC is custom made to fit the pillar spe...

Page 3: ...on a support Place connecting bars into slots in straps and push the studding provided through the holes to attach them NOTE The open channel section of the bar must be positioned against the wall of...

Page 4: ...tudding so that it clamps the straps to the pillar Tighten cover screws The VCC1 has an arm on one cover only The VCC2 has arms on both covers STEP 4 Connect direct fitting adapter ordered separately...