4
01865 767676
www.unicol.com
Revised 15/12/20
STEP 5
Slide the mount and adapter over the column and
position at the desired height. When happy, tighten
the grub screw to secure the mount and screen into
position.
STEP 6
Loosen the screws at the side of the mount to set
the angle of the screen. Once in position, retighten
the screws.
STEP 1
Position floor plate and mark through the screw
holes (arrows above) where it will be positioned.
Before you screw through, ensure any cables
that are going underneath the plate are threaded
through the column grips (circled above). Continue
with Step 2.
STEP 1
Before you begin, make sure the base is stable and
ensure the brakes are on on the front two castors.
Loosen the screws on the column grips to close
them.
Thread cabling through bottom of base into column
grips as highlighted above. Continue with Step 2.
BOLT DOWN
TROLLEY
