4
Revised 26/04/24
01865 767676
www.unicol.com
STEP 5
Using another team member, lift the screen up and
gradually offer it up to the back plate. Gently tilting
the screen forward, hook the arms over the lip of the
back plate and lower once in position. Centre the
screen horizontally by sliding from side to side until
you are happy with the position.
STEP 6
Once centered, ensure the bottom screws are not
screwed tight and screw down the top screws to
level the screen. Once level tighten bottom screws to
secure the mount.
Note that you won’t be able to adjust the screens
position after the screws have been tightened.
STEP 7
There is fine adjustment of the screen tilt angle using
the allen key provided to rotate the M8 grub screw
adjuster on the rear of the mount. Turn clockwise to
tilt upwards.
Cable up your screen using cable ties through the
holes in the arms. There are extra tags on the elbow
of the first arm for this purpose.