01865 767676
www.unicol.com
3
Revised 15/12/20
STEP 1
The unit is supplied with a power cable with a kettle
plug & socket along its length. Use this to thread
the cabling down the Parabella’s legs and through
the base.
STEP 2
With legs laying on a flat surface (as shown above)
pick up the base with the help of another person
and offer the base to the mast. Ensure fixing holes
are aligned and then secure.
STEP 3
Fix the C15230 mounting plate to the top of the
legs using M12x25 screws.
STEP 4
Line the back plate up with the mounting plate,
as shown above. Fix 4 M10x20 screws from behind
the mount adapter and into the 4 rivet nuts located
on the back plate. Ensure back plate is secure and
screws are tightened.