4
Revised 26/04/24
01865 767676
www.unicol.com
STEP 6
Once centered, ensure the bottom screws are not
tightly fixed and screw down the top screws to level
the screen. Once level tighten bottom screws to
secure the mount.
NOTE:
The screen position cannot be adjusted after
the bottom screws have been tightened.
STEP 5
Using another team member, lift the screen up and
gradually offer it up to the back plate. Gently tilting
the screen forward, hook the arms over the lip of the
back plate rail and lower once in position.
Centre the screen horizontally by sliding from side to
side until you are happy with the position.
STEP 7
(a) With the screen fitted, cable up from the 4-way
power socket up through the aperture in the mount
adapter and screen backplate to the rear of screen.
(b) External cables can be routed through either of
the two apertures at the base of the unit. All cables
should be fed up the power train to exit at the top
of the unit.
STEP 8
To operate the unit connect the cable provided to a
power source and plug the ‘kettle’ connector into the
rear of the unit. Switch on and set up display and any
AV accessories. Use the Remote Control provided
and operate the actuator to rise and descend to
ensure its full travel to complete installation.
(a)
(b)