Unicol GKUX Manual Download Page 3

01865 767676

[email protected]

www.unicol.com

3

Revised 15/09/22

STEP 1

Using the 4 mounting slots cut out on the ceiling 
plate, determine where you want to install, mark it 
and fix into position. If fixing to a slanted ceiling, 
adjust the angle of the body by loosening the 
screws at the side, levelling and tightening again.

Please consider cabling and fixings prior to
installation. Please check surface can support 5x 
the combined solutions weight.

STEP 2

Fix the Universal plate and telescopic section to 
the projector using the screws provided. Adjust 
arm lengths (2) by loosening the knurled screws 
(3) to enable fixing screws to locate into projector 
fixing holes. Level the Universal plate against 
the projector by screwing up or down the hollow 
screws (1). Once in position, centralise the mount 
and tighten all screws.

STEP 3

Join the 2 parts of the GKU1 together by sliding the 
bottom half into the top half and fix using the dome 
headed allen screws. Adjust the telescopic section 
as required and fully tighten screws.

STEP 4

Using the pan, tilt and screen levelling functions 
adjust the projector alignment. Finally tighten all 
dome headed screws using the allen key provided.

1

2

3

STANDARD

Reviews: