01865 767676
www.unicol.com
3
Revised 05/01/24
STEP 1
With mast laying flat on a table (as shown above)
pick up the base with the help of another person
and offer the base to the mast. Ensure fixing holes
are aligned and then secure with M10x25 screws.
OPTIONAL: Locate the castors and push them
into positon (use a mallet if required). Ensure the 2
braked castors are located at the front.
STEP 2
Once secure, stand the stand/trolley upright and
place on a flat, stable surface.If building the trolley
version shown, lock the brakes located on the front
castors to prevent movement. Attach the 4-way
power socket.
*Electrical socket instructions supplied separetely
STEP 4
Line the back plate up with the span unit,
as shown above. Fix 4x M10x20 screws from behind
the mount adapter and into the 4 rivet nuts located
on the back plate. Ensure back plate is secure and
screws are tightened. This can be adjusted later.
Repeat for the other side.
STEP 3
Line the span unit up with the 150x150mm centre
holes at the top of the mast. Fix into place by bolting
in the top two holes first.
[Fix any sound bar or video conference mounts now]
Place bolts into the bottom two holes and secure
into place.