01865 767676
www.unicol.com
5
Revised 22/04/21
STEP 9
Once centered, ensure the bottom screws are not
screwed tight and screw down the top screws to
level the screen. Once level tighten bottom screws
to secure the mount.
ALT:
If using tilting arms, this
is when you can adjust them to suit.
Repeat 7 - 9 for the second screen.
STEP 10
This step will require two people.
Once both screens are secure on the backplate,
gently slide the screen and backplate from left to
right as required on the span bar to centre both
screens. Tighten fixings to secure.
STEP 11
Identify the front mast in-fill panels (the 4 with
cutouts go to the rear). Start with the panel that has
the 4-way power socket attached clip into place.
Cable up.
STEP 12
If fitting a shelf, choose the height you’d like and
insert between the panels as you’re clipping them
into position.
To insert, angle the shelf as you offer it up to the
columns. Level out and rest it in position. Unlike the
infill panels, the shelf does not clip into place.
