2
/
3
The doorbell host operating
The doorbell pattern choice
Short press
【
】
button
，
switch the doorbell mode (For example, door bells and lights
flashing, only the door bells, and only the lights flashing these three modes)
The doorbell host door ringtones choice
Short press
【
】
button, “drop” 1 time, Choose the music order circulation
，
Play the
currently selected music. Long press
【
】
button, Can change the direction of music playback.
The doorbell host door ring tone volume Settings
Short press
【
】
button, set the current mode of the volume level
4—3—2—1—4—3—2—1—4--. And play music, the minimum voice is Level 1
，
The
biggest voice is level 4, when set to level 4 "drops dripping" 2 times.
Mark
：
If set the doorbell host is the LED light is flashing mode
，
touch
【
】
and
【
】
button is invalid.
If set the doorbell host is the ringing door bells mode, touch
【
】
and
【
】
button
only the ring tone, there will be no LED lights flashing.
If set the doorbell host are LED light is flashing mode and ringing door bells
mode
，
touch
【
】
and
【
】
button , A door ring tone hint, and there will be a
LED light is flashing.
Learning (Increase) the new door bell ring operation
Long press
【
】
button, the doorbell host “drop” 1 time
，
LED light is bright
，
on behalf of into
the learning state
，
touch the doorbell button, the LED will flash lights twice
，
The host “drop” 2
times expression learning (Increase) success, LED lights flashing at a time
，
The host “drop” 1 time
expression Learning (Increase) failure, LED lights flashing three times
，
he host “drop” 3 times
expression learn(Increase) the full.
（
When the doorbell host into the learning state
，
Short press
doorbell host any key or 20 seconds without any operation
，
the host will exit the learning state
）
4.
Conclusion
Long press
【
】
button is starting up. Continuous slow
“
drop” 2 times and LED lights
flashing ten times
，
Until the fast
“
drop” 2 times and LED indicator lights flashing rapidly
expression delete all the doorbell button
，
The host recovers factory settings.
5.
Technical parameters
Doorbell host (receiver) Working Current: <80mA.
Doorbell host (receiver) Working voltage: AC100~240V 50/60Hz
Doorbell remote control (transmitter): battery: DC12V
Working frequency: 433.92MHz