background image

16

3.3 - PACKAGING

 

XC-K 3

 boilers are supplied complete with the door 

and smoke chamber assembled, while the casing 

and insulation are included in separate cardboard 

packs.

Before starting installation, make sure that the length and width 

of the boiler body received correspond respectively to the di-

mensions L

 

and W of the boiler you have ordered

The casing of boilers complete with insulation mattresses, is 

contained in boxes.

  

Boxes

n.3  

XC-K 3 1000  

n.3  

XC-K 3 1250 - 1500

n.3  

XC-K 3 1750 - 2000

n.4  

XC-K 3 2500 - 3000

The control panel is optional and if required it is packed with its 
own cardboard and placed inside the furnace,

as accessories positioned inside thefurnace you will also find:

   1 box containing hydraulic connection flanges, with 

  relative gaskets and bolts (where included).

-  ceramic fibre cord to insulate between burner blast tube and 

door. 

Keep the packaging material (plastic bags, etc.) out of the reach 

of children as they are potential sources of danger.

unical will not be held liable for damage to persons, 

animals or objects due to failure to comply with the 

above instruction.

Inside the furnace is contained:

Pouch with the following documentation:

  -  manager operating instructions booklet

  -  Instruction booklet for the installer and maintenance 

   engineer

  -  2 Spare parts form 

  -  Certificate of conformity

  -  Testing certificate

Accessories box containing:

  -  5 bends + a T + a plastic condensate draining cap 

   

-   Condensate drain siphon pipe 1 m.

-   Protect all parts against impacts if they are 

to be transported.

OBLIGATION!

wear protective gloves

3.3.1 - handling

The boiler must be handled by lifting by the upper 
hooks, or by translation with rollers placed under 
the sturdy base side. 

Summary of Contents for XC-K3 1000









































Reviews: