14
Technical features and dimensions
3
INSTALLATION
INSTRUCTIONS
3.1 - GENERAL WARNINGS
ATTENTION!
This boiler is intended solely for the use for
which it was expressly designed. Any other
use is to be considered improper and there-
fore dangerous.
This boiler heats water at a temperature lower
than the atmospheric pressure boiling tem-
perature.
ATTENTION!
The appliances are designed to be installed
inside suitable rooms or technical spaces
only. The appliances cannot be installed or
operate outdoors. Outdoor installation can
cause malfunctioning and be dangerous.
Choose specifically designed appliances for
outdoor installation.
Before connecting the boiler, have professio-
nally qualified personnel:
a) Thoroughly wash all the piping of the sy-
stem to remove any residue or impurities whi-
ch could jeopardise proper operation of the
boiler;
b) Check that boiler is set up to operate with
the available type of fuel.
This can be seen written on the package and
on the technical feature plate;
c) Check that the chimney/flue has an appro-
priate draught, without any bottlenecks, and
that no exhausts from other appliances are
inserted, unless the flue has been implemen-
ted to accommodate several utilities according
to specific standards and prescriptions in for-
ce. Only after this check can the fitting betwe-
en the boiler and chimney/flue be mounted;
ATTENTION!
In rooms with the presence of aggressive
vapours or dust, the appliance must operate
independently from the air inside the instal-
lation room!
ATTENTION!
The appliance must be installed by a quali-
fied technician with the technical-professio-
nal requirements according to law 46/90
which, under his own responsibility, guaran-
tees compliance with standards according
to good practice rules.
The boiler must be connected to a central hea-
ting system and/or domestic hot water supply
network compatible with its efficiency and ou-
tput.
