background image

5

General information

1.6 - GENERAL WARNINGS

This instruction manual is an integral and indispensable part
of the product and must be retained by the user.

Please read carefully the instructions contained in this manual
as they provide important indications regarding the safe
installation, use and servicing of this appliance.

Keep this manual in a safe place for future reference.

The installation and servicing must be carried out in
accordance with the regulations in force according to the
manufacturer’s instr uctions and by legally competent
authorized persons.

By a competent person, we imply a person who has a specific
technical qualification in the field of components for central
heating systems for domestic use, domestic hot water
production and ser vicing. The person must have the
qualifications foreseen by the current laws in force.

Bad or irregular servicing could compromise the safe
operation of the appliance, and could cause injury to persons,
animals or damage to property.

The manufacturer shall not be held liable for any such injury
and/or damage.

Before carrying out any cleaning or servicing turn off the
electrical supply to the boiler by means of the ON/OFF switch
and/or by means of the appropriate shutdown devices.

In the event of failure and/or faulty functioning of the
appliance,switch off the boiler. Do not attempt to make any
repairs: contact qualified technicians.

Any repairs must be carried out solely by  authorized
technicians and using only original spare parts. Non-
observance of the above requirement may jeopardize the
safety of the appliance.

To guarantee the efficiency and correct functioning of the
appliance it is indispensable to have the boiler serviced
annually by a qualified person.

If the boiler remains unused for long periods, ensure that any
dangerous parts are rendered innocuous.

If the appliance is sold or transferred to another owner or if the
present user moves home and leaves the appliance installed,
ensure yourself that the manual always follows the appliance
so that it can be consulted by the new owner and/or installer.

Only original accessories must be used for all appliances
supplied with optional extras or kits (including electrical ones).

This appliance must be used only for the purposes for which
it has been expressively designed. Any other use shall be
considered incorrect and therefore dangerous.

1.7 – PRESENTATION

Nowadays, the dwellings with lots of unit are adopting, more
frequently, originals forms of heating/ cooling different from
the classic system of central heating or autonomous boiler.

The modules for the central, autonomous heating 

SATAL

PLUS R 

are devices capable of providing hot water, domestic

water and heating, with room control temperature (optional)
in each single unit according to the needs.

Summary:  ALL THE  ADVATAGES  OF THE  AUTONOMOUS
HEATING WITHOT ANY INCOVENIENTS.

To make it simple, think of the hydraulic section of a combined
mural boiler hold in a special box, fed by pipes coming from
the central generator placed, for example, into the thermal
power plant or into a combined heat and power plant.

These modules  work at user command, and for monitoring
completely the activities they can be equipped of a calories
counter or an energy counter and a counter of the domestic
water consuming, for the division of the expense between all
the units and the data telecast  as well the application of the
optional domotics system.

They  answer to precise goals user:

• Self management
• Pay according to amount consumed
• Low maintenance
• Privacy

Goals of the energy supplier:
• Only flame point
• Optimization yields
• Control and Tele-management and then counting

They can be set on new or renovated buildings, but even for
the transformation from autonomous central system to
horizontal distribution

Summary of Contents for SATAL ONE PLUS R

































Reviews: