12
System manager operating instructions
Set language
TIME
Adjust the current time:
1. Minute 2. Hour
ITALIAN
PARAMETERS VISIBLE AT COMMISSIONING
Default
Individual values
Value range
Description
INSTALLATION PROGRAMMING
YEAR
Adjust the current date
MONTH
Adjust the current date
DAY
Adjust the current date
BUS ID
1
Enter the number for heating circuit “1”:
00-15 default 01
BUS ID
2
Enter the number for heating circuit “2”:
00-15 default 02
SENSOR 5K
value 00
00 = sensor 5 kOhm NTC
01 = sensor 1 kOhm PTC, the code number is required;
the controller is restarted after it is entered
RETURN
Commissioning complete
open level, change the value, save the value and activate next value
open level, change the value, save the value
Depending on implementation
ITALIAN
ITALIAN
(-20) (20)
CONTRAST
0
Sensor, day
CHOICE OF READING
- - - -
HS 01 / HS 02
SELECTION - PROGRAMMING
Default
Individual values
Value range
Description
DOMESTIC HOT WATER PROGRAMMING
00, 01 (OFF / ON)
1X DHW
00 = OFF
10 °C - 70 °C
DHW TEMPERATURE 1 NOMINAL
60 °C
10 °C - 70 °C
DHW TEMPERATURE 2 NOMINAL
60 °C
Exit level using
RETURN
10 °C - 70 °C
DHW TEMPERATURE 3 NOMINAL
60 °C
OK - 70K
COIL VALUE
0 degrees
00, 01 (OFF / ON)
RECIRCULATION PUMP
00 = OFF
00, 01 (OFF / ON)
ANTI-LEGIONELLA
00 = OFF
PARAMETERS PROGRAMMABLE BY USING
PROGRAMMING E8.5064 HEATING CONTROLLER
As far as adjustment and programming of the heating controller, the following are the parameters which can be
programmed by the user according to his requirements.
Exit level using
RETURN
01
Summary of Contents for PANEL BOARD MODULATING MASTER
Page 27: ...Remarks...
